top of page
Oak Tree Tops
Belleair Fl Mini.jpg

A stump is what is left after the tree is gone, and it does not take long to become a problem. Stump work is the biggest part of what Anthony's Tree and Stump Service does, and it is the job Anthony knows best after about 20 years in trees. His crew grinds and removes stumps of every size for homeowners and businesses in Oldsmar, Safety Harbor, Palm Harbor, Clearwater, Largo, St. Petersburg, throughout Pinellas County, and across the line into Pasco and Hillsborough County.

​

Anthony is the owner and works the jobs himself. He is licensed, bonded and insured, and he gives you a clear estimate before any work starts. Estimates are free.

​

Why Not Just Leave the Stump?

Plenty of people mow around a stump for a year or two. Here is why that usually stops working.

It is a trip and mower hazard, especially once grass grows over it.

Rotting wood can attract termites, carpenter ants and other pests close to your home.

Some stumps send up new shoots again and again.

It takes up space you may want for grass, a patio, a fence line or a garden bed.

Surface roots can lift walkways and make the yard uneven.

​

Stump Grinding or Full Stump Removal?

We do both, and the right one depends on what you plan to do with the spot.

Stump grinding uses a machine with a spinning cutting wheel that chews the stump into wood chips, down below ground level. It is the most common choice. It is quick, it leaves less mess than digging, and it works in tight yards where a large machine cannot turn around. Some roots stay in the ground and break down over time.

Full stump removal takes the stump and its main root ball out of the ground. It is the better pick when you plan to build over the spot, pour a slab, or put in something that cannot sit on top of decaying roots. It leaves a larger hole to fill, so the job takes more equipment and more cleanup.

Not sure which one fits? Tell Anthony what you want the space to become and he will tell you straight which option makes sense.

Stump Grinding

Commercial-Grade Stump Grinding
and Stump Removal
in Oldsmar and Pinellas County, FL

A stump is what is left after the tree is gone, and it does not take long to become a problem. Stump work is the biggest part of what Anthony's Tree and Stump Service does, and it is the job Anthony knows best after about 20 years in trees. His crew grinds and removes stumps of every size for homeowners and businesses in Oldsmar, Safety Harbor, Palm Harbor, Clearwater, Largo, St. Petersburg, throughout Pinellas County, and across the line into Pasco and Hillsborough County.

​

Anthony is the owner and works the jobs himself. He is licensed, bonded and insured, and he gives you a clear estimate before any work starts. Estimates are free.

​

Why Not Just Leave the Stump?

Plenty of people mow around a stump for a year or two. Here is why that usually stops working.

It is a trip and mower hazard, especially once grass grows over it.

Rotting wood can attract termites, carpenter ants and other pests close to your home.

Some stumps send up new shoots again and again.

It takes up space you may want for grass, a patio, a fence line or a garden bed.

Surface roots can lift walkways and make the yard uneven.

​

Stump Grinding or Full Stump Removal?

We do both, and the right one depends on what you plan to do with the spot.

Stump grinding uses a machine with a spinning cutting wheel that chews the stump into wood chips, down below ground level. It is the most common choice. It is quick, it leaves less mess than digging, and it works in tight yards where a large machine cannot turn around. Some roots stay in the ground and break down over time.

Full stump removal takes the stump and its main root ball out of the ground. It is the better pick when you plan to build over the spot, pour a slab, or put in something that cannot sit on top of decaying roots. It leaves a larger hole to fill, so the job takes more equipment and more cleanup.

Not sure which one fits? Tell Anthony what you want the space to become and he will tell you straight which option makes sense.

Large tree stump with wide surface roots beside a wooden fence in a Florida backyard

How a Stump Grinding Job Goes

  1. Walk the property. Anthony looks at the stump, the roots, the gate width, the fence line and anything close by that needs protecting.
     
  2. Clear estimate. You get the price and the plan before any work begins.
     
  3. Get the area ready. Rocks, metal and loose debris around the stump come out of the way, and the crew sets up the machine for the safest approach.
     
  4. Grind below grade. The grinder works across the stump and the root flare, cutting down below ground level so you can fill and plant.
     
  5. Clean up. The chips and debris are handled the way you asked, left as mulch or hauled away, and the yard is left neat.
     

What Changes the Price of a Stump Job
No two stumps cost the same, which is why we look before we quote. These things matter most:

  • Stump diameter and how far the root flare spreads
     
  • How many stumps are on the property
  • How much room the machine has to get in, including gates, fences and slopes
     
  • Whether you want the chips left behind or hauled away
  • Whether it is grinding or full removal
     

We do not guess over the phone. Anthony looks at the job and gives you a clear estimate, free of charge.

Equipped for Stumps of Any Size
A small stump behind a shed and a huge stump from a storm-felled tree are very different jobs. Anthony's crew works with stump grinders, chippers and the heavier equipment needed for big removals, so the job does not stall because the machine was too small. That is also why we can often take care of the tree and the stump on the same job.

Stump Grinding After a Tree Comes Down
Most of our stump work follows tree removal. If we took the tree down, we can grind the stump on the same visit and save you a second appointment. If another company removed the tree, or the stump has been sitting for years, call us anyway. Old stumps are no problem.
After a storm, stumps and split trunks are one of the most common leftovers. For fallen or hazardous trees, see our Emergency Tree Service page. We respond around the clock.

Homes, Businesses and Property Managers

  • Homeowners: back yards, front yards, driveways and fence lines. See our Residential Tree Services.
     
  • Businesses and communities: shopping centers, offices, HOA common areas and rental properties. See our Commercial Tree Services.
     
  • Lot clearing: stumps left after clearing a lot can be ground or removed as part of the same job.
     

Where We Grind Stumps
Our office is at 380 Douglas Road East in Oldsmar, and Anthony lives in Oldsmar and Palm Harbor, so these are his own neighborhoods. We grind and remove stumps in Oldsmar, Safety Harbor, Palm Harbor, Tarpon Springs, Clearwater, Dunedin, Largo, Pinellas Park, St. Petersburg, Seminole, and the beach communities from Belleair Beach to Treasure Island.

What to Do With the Spot Afterward
Once the stump is ground, the hole is usually filled with a mix of the wood chips and fresh topsoil, then covered with sod or seed. Give it a few weeks to settle, and top it off if it sinks. Anthony's Tree and Stump Service does not plant trees or shrubs, so for new plants or sod installation a landscaper or local nursery can take it from there.

One tip before any digging or grinding near buried lines: call 811 for free so utilities can be marked, and tell us about any irrigation lines or buried wires you already know about.

Stump Grinding FAQ - How deep do you grind a stump?

Below ground level, so the spot can be filled and planted. The exact depth depends on the stump and what you plan to put there, so tell us at the estimate.

Can you grind a stump close to a fence, patio or house?
Often, yes. It depends on access and what is nearby, so Anthony looks at the spot first and tells you plainly what is possible.

Will the roots die after grinding?
Grinding removes the stump and the top of the root system. Remaining roots break down over time. If you want the roots out for building or a new layout, ask about full stump removal.

How long does a stump grinding job take?
A single stump is usually a short job. Large stumps or several stumps take longer, and we tell you what to expect at the estimate.

What happens to the wood chips?
Tell us what you prefer. The chips can be left for mulch or filling the hole, or hauled away.

How do I get a stump estimate?
Call (727) 254-0338 or use the contact form. Estimates are free and you get a clear price before any work starts.

Ready to get rid of that stump?
Request a free estimate from Anthony's Tree and Stump Service. Contact us or call (727) 254-0338, any hour. We are open 24 hours a day, 7 days a week.
 

Backyard with bare ground where a large stump was ground out beside a screened porch

How a Stump Grinding Job Goes

  1. Walk the property. Anthony looks at the stump, the roots, the gate width, the fence line and anything close by that needs protecting.
     
  2. Clear estimate. You get the price and the plan before any work begins.
     
  3. Get the area ready. Rocks, metal and loose debris around the stump come out of the way, and the crew sets up the machine for the safest approach.
     
  4. Grind below grade. The grinder works across the stump and the root flare, cutting down below ground level so you can fill and plant.
     
  5. Clean up. The chips and debris are handled the way you asked, left as mulch or hauled away, and the yard is left neat.
     

What Changes the Price of a Stump Job
No two stumps cost the same, which is why we look before we quote. These things matter most:

  • Stump diameter and how far the root flare spreads
     
  • How many stumps are on the property
  • How much room the machine has to get in, including gates, fences and slopes
     
  • Whether you want the chips left behind or hauled away
  • Whether it is grinding or full removal
     

We do not guess over the phone. Anthony looks at the job and gives you a clear estimate, free of charge.

Equipped for Stumps of Any Size
A small stump behind a shed and a huge stump from a storm-felled tree are very different jobs. Anthony's crew works with stump grinders, chippers and the heavier equipment needed for big removals, so the job does not stall because the machine was too small. That is also why we can often take care of the tree and the stump on the same job.

Stump Grinding After a Tree Comes Down
Most of our stump work follows tree removal. If we took the tree down, we can grind the stump on the same visit and save you a second appointment. If another company removed the tree, or the stump has been sitting for years, call us anyway. Old stumps are no problem.
After a storm, stumps and split trunks are one of the most common leftovers. For fallen or hazardous trees, see our Emergency Tree Service page. We respond around the clock.

Homes, Businesses and Property Managers

  • Homeowners: back yards, front yards, driveways and fence lines. See our Residential Tree Services.
     
  • Businesses and communities: shopping centers, offices, HOA common areas and rental properties. See our Commercial Tree Services.
     
  • Lot clearing: stumps left after clearing a lot can be ground or removed as part of the same job.
     

Where We Grind Stumps
Our office is at 380 Douglas Road East in Oldsmar, and Anthony lives in Oldsmar and Palm Harbor, so these are his own neighborhoods. We grind and remove stumps in Oldsmar, Safety Harbor, Palm Harbor, Tarpon Springs, Clearwater, Dunedin, Largo, Pinellas Park, St. Petersburg, Seminole, and the beach communities from Belleair Beach to Treasure Island.

What to Do With the Spot Afterward
Once the stump is ground, the hole is usually filled with a mix of the wood chips and fresh topsoil, then covered with sod or seed. Give it a few weeks to settle, and top it off if it sinks. Anthony's Tree and Stump Service does not plant trees or shrubs, so for new plants or sod installation a landscaper or local nursery can take it from there.

One tip before any digging or grinding near buried lines: call 811 for free so utilities can be marked, and tell us about any irrigation lines or buried wires you already know about.

Stump Grinding FAQ - How deep do you grind a stump?

Below ground level, so the spot can be filled and planted. The exact depth depends on the stump and what you plan to put there, so tell us at the estimate.

Can you grind a stump close to a fence, patio or house?
Often, yes. It depends on access and what is nearby, so Anthony looks at the spot first and tells you plainly what is possible.


Will the roots die after grinding?
Grinding removes the stump and the top of the root system. Remaining roots break down over time. If you want the roots out for building or a new layout, ask about full stump removal.

How long does a stump grinding job take?
A single stump is usually a short job. Large stumps or several stumps take longer, and we tell you what to expect at the estimate.

What happens to the wood chips?
Tell us what you prefer. The chips can be left for mulch or filling the hole, or hauled away.

How do I get a stump estimate?
Call (727) 254-0338 or use the contact form. Estimates are free and you get a clear price before any work starts.


Ready to get rid of that stump?
Request a free estimate from Anthony's Tree and Stump Service. Contact us or call (727) 254-0338, any hour. We are open 24 hours a day, 7 days a week.

Get an estimate for your upcoming project

bottom of page